Centrifugal stirring and mixing defoamers play an important role in many industrial fields, such as electronics, chemical engineering, pharmaceuticals, etc. It can effectively remove bubbles from materials, saving a lot of time for R&D colleagues to make formulas for express delivery, and improving the quality and performance of products. However, in order to ensure its long-term stable operation, proper maintenance and upkeep are crucial.

The micro nano stirring defoamer plays a crucial role in various material processing and production processes. Proper maintenance is essential to ensure its long-term stable operation, improve work efficiency, and extend its service life. Today, we will provide a detailed introduction to the maintenance points of the hybrid defoamer.

1、 Daily cleaning

After each use of the Xing Xing gravity stirring defoamer, it should be cleaned promptly. Firstly, turn off the power and unplug the plug to ensure safety. Then, use a clean damp cloth to wipe the outer shell of the machine, removing dust and stains from the surface., You can first use tools to remove residual materials, and when using solvents for cleaning. Be careful not to let water enter the electrical components inside the machine during cleaning.

2、 Regularly inspect components

（1）. Regularly check the wear of the mixing cup container. If wear or deformation is found, it should be replaced in a timely manner to ensure the mixing effect.

（2）. Check the transmission components, such as belts, gears, etc., for looseness and wear, and regularly apply lubricating oil.

（3）. Check the electrical connection parts to ensure that the wires are not damaged, the plugs are not loose, and to avoid safety hazards such as short circuits.

（4）. Regularly replace the vacuum pump oil, clean the vacuum management, solenoid valve, filter, seal ring cavity, etc;

3、 Lubrication and maintenance

Regularly add an appropriate amount of lubricating oil to the moving parts of the mixed defoamer. For example, bearings, gears, and other parts are generally lubricated at regular intervals based on their frequency of use and working environment. However, it should be noted that the lubricating oil used should meet the requirements of the machine to avoid component damage caused by the use of inappropriate lubricating oil.

4、 Correct operation

Correct operation is the key to extending the lifespan of a machine. In the mixed defoamer, the operation should be carried out according to the requirements of the operation manual to avoid improper operations such as overload operation and long-term continuous work.

5、 Storage environment

When the machine is not in use for a long time, a dry and well ventilated storage environment should be chosen to avoid moisture and high temperatures. At the same time, cover the machine with a dust cover to prevent dust from entering.